+61 3 9775 0333
Our stainless coater blade has the same coating properties as a traditional coater blade in carbon steel.
Stress corrosion can cause cracks in coater blades manufactured from traditional carbon steel if the coating compound is corrosive. Paper mills that use coating colours with "abnormal" pH-values can improve the service life by using our stainless coater blade.
The Stripsteel stainless coater blades are available in all current sizes.
SPECIFICATION | DETAIL | text | text | text | text | text | text | text | text | text |
---|---|---|---|---|---|---|---|---|---|---|
Flatness | Accurate flatness is assured and is essential for perfect coater blade performance. |
text | text | text | text | text | text | text | text | text |
Hardness | The specially hardened zone has a hardness of VPN 780. The rest of the blade has a normal hardness of VPN 600. |
text | text | text | text | text | text | text | text | text |
Edges | 15 - 90 | text | text | text | text | text | text | text | text | text |
Straightness | Note that our special edge straightness permits a straightness deviation of maximum 0.3mm per 3000mm (.012in per 10ft) of measured length. This also applies to the back edge. Our modern manufacturing facilities make it possible to attain this extreme straightness. | text | text | text | text | text | text | text | text | text |
Width and Thickness | Stripsteel Stainless coater blades are manufactured in a wide range of standard widths and thicknesses to suit all coating machines. |
text | text | text | text | text | text | text | text | text |
Thickness Range | 0.25 - 0.64 mm (.0098 - .0252in) | text | text | text | text | text | text | text | text | text |
Range of Width | max 100mm (4in) | text | text | text | text | text | text | text | text | text |
Remote communications | Servo Talk 3 | text | text | text | text | text | text | text | text | text |
Splice table and web guide | Included | text | text | text | text | text | text | text | text | text |
Unwind air shaft dia. | 3” (76mm) | text | text | text | text | text | text | text | text | text |
Max unwind roll dia. | 28” (710mm) | text | text | text | text | text | text | text | text | text |
Matrix air shaft dia. | 3” (76mm) | text | text | text | text | text | text | text | text | text |
Matrix max roll dia. | 24” (610mm) | text | text | text | text | text | text | text | text | text |
Rewind mandrel dia. | 3” (76mm) | text | text | text | text | text | text | text | text | text |
Rewind roll max dia. | 28” (710mm) | text | text | text | text | text | text | text | text | text |
Label repeats | 7.5” – 15.75” | text | text | text | text | text | text | text | text | text |
Max speed | 300 ft/min (repeat dependent) | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
DIMENSIONS | MM | IN | text | text | text | text | text | text | text | text |
---|---|---|---|---|---|---|---|---|---|---|
Standard Thicknesses | 0.254 0.305 0.381 0.457 0.508 |
.010 .012 .015 .018 .020 |
text | text | text | text | text | text | text | text |
Thickness Range | 0.25 - 0.64 |
.0098 - .0252 | text | text | text | text | text | text | text | text |
Range of Width | 100 | 4 | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | ||
text | text | text | text | text | text | text | text | text | ||
text | text | text | text | text | text | text | text | text | ||
text | text | text | text | text | text | text | text | text | ||
Remote communications | Servo Talk 3 | text | text | text | text | text | text | text | text | text |
Splice table and web guide | Included | text | text | text | text | text | text | text | text | text |
Unwind air shaft dia. | 3” (76mm) | text | text | text | text | text | text | text | text | text |
Max unwind roll dia. | 28” (710mm) | text | text | text | text | text | text | text | text | text |
Matrix air shaft dia. | 3” (76mm) | text | text | text | text | text | text | text | text | text |
Matrix max roll dia. | 24” (610mm) | text | text | text | text | text | text | text | text | text |
Rewind mandrel dia. | 3” (76mm) | text | text | text | text | text | text | text | text | text |
Rewind roll max dia. | 28” (710mm) | text | text | text | text | text | text | text | text | text |
Label repeats | 7.5” – 15.75” | text | text | text | text | text | text | text | text | text |
Max speed | 300 ft/min (repeat dependent) | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |