+61 3 9775 0333
It takes a special kind of knife to cut printing ink. Printing ink manufacturers know it does, which is why they find Stripsteel ink knives a cut above the rest.
Whichever machine is used to make printing ink, Stripsteel ink knives are used to scrape off the printing ink after it has been refined in the rolling section between the cylinders.
To avoid excessive wear on the knife and cylinder, the lowest possible knife pressure is essential. The special straightness of Stripsteel ink knives means that they can be mounted with great precison. Low knife pressure leads to less wear and long running time.
In addition to the standard knife, Stripsteel produces a blade with an extra hard edge. An edge that is harder than the knife itself, which ensures better resistance to wear and running times twice as long or longer than the standard knife.
Specification | Detail | text | text | text | text | text | text | text | text | text |
---|---|---|---|---|---|---|---|---|---|---|
Chemical composition % (approx) | Grade C Si Mn Pmax Smax Cr 20c 1.0 0.70 0.40 0.020 0.015 0.15 |
text | text | text | text | text | text | text | text | text |
Mechanical Properties | Hardened and tempered. Grade Hardness Hv Edge Hardness Hv 20C 450-540 750-850 |
text | text | text | text | text | text | text | text | text |
Surface | Blue polished or bright polished surface | text | text | text | text | text | text | text | text | text |
Flatness | Flatness deviation max. 0.3% of strip width | text | text | text | text | text | text | text | text | text |
Straightness | Straightness deviation max. 0.13 mm/1 m | text | text | text | text | text | text | text | text | text |
Form of delivery | Coil Lengths, tolerance (+ 5/-0 mm) | text | text | text | text | text | text | text | text | text |
Edges | One edge bevelled. Angle from 20-60 degrees |
text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
DIMENSIONS | Widths | Thickness | text | text | text | text | text | text | text | text |
---|---|---|---|---|---|---|---|---|---|---|
Standard Sizes | 20-60 mm 20-60 mm 20-60 mm 20-60 mm |
0.381 mm 0.508 mm 0.635 mm 0.700 mm |
text | text | text | text | text | text | text | text |
Thickness Range | 0.25 - 0.64 |
.0098 - .0252 | text | text | text | text | text | text | text | text |
Range of Width | 100 | 4 | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | ||
text | text | text | text | text | text | text | text | text | ||
text | text | text | text | text | text | text | text | text | ||
text | text | text | text | text | text | text | text | text | ||
Remote communications | Servo Talk 3 | text | text | text | text | text | text | text | text | text |
Splice table and web guide | Included | text | text | text | text | text | text | text | text | text |
Unwind air shaft dia. | 3” (76mm) | text | text | text | text | text | text | text | text | text |
Max unwind roll dia. | 28” (710mm) | text | text | text | text | text | text | text | text | text |
Matrix air shaft dia. | 3” (76mm) | text | text | text | text | text | text | text | text | text |
Matrix max roll dia. | 24” (610mm) | text | text | text | text | text | text | text | text | text |
Rewind mandrel dia. | 3” (76mm) | text | text | text | text | text | text | text | text | text |
Rewind roll max dia. | 28” (710mm) | text | text | text | text | text | text | text | text | text |
Label repeats | 7.5” – 15.75” | text | text | text | text | text | text | text | text | text |
Max speed | 300 ft/min (repeat dependent) | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |
text | text | text | text | text | text | text | text | text | text | text |